CUSTOM ESPO ILITIES

BATTERY

Your tractor has a battery charging system which is suffi- cient for normal use. However, periodic charging of the battery with an automotive charger will extend its life.

Keep battery and terminals clean. = Keep battery bolts tight.

Keep small vent holes open (See "CONNECT BAT- TERY" in tl,e Assembly section of this manual).

,,Recharge at 6-10 amperes for 1 hour.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to "leak" power.

, Remove terminal guard.

=Disconnect BLACK battery cable first then RED bat- tery cable and remove battery from tractor.

,,Wash battery with solution of four tablespoons of baking soda to one gallon of water. Be careful not to get the soda solution into the ceils.

=Rinse the battery with plain water and dry.

=Clean terminals and battery cable ends with wire brush until bright.

-Coat terminals with grease or petroleum jelly.

,Reinstall battery (See "CONNECT BATTERY" in the Assembly section of this manual).

Change the oil after the first two hours of operation and every 50 hours thereafter or at least once a year if the tractor is not used for 50 hours in one year,

Check the crankcase oil level before starting the engine and after each eight (8) hours of operation. Tighten oil fill cap/dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL (See Fig. 15)

Determine temperature range expected before oil change, All oi! must meet API service classification SF or SG,

Be sure tractor is on level surface.

,Oil will drain more freely when warm.

• Catch oil in a suitable container.

Remove oil fil! cap/dipstick. Be careful not to allow dirt to enter the engine when changing ol,

. Remove drain plug.

=After oil has drained completely, replace oil drain plug and tighten securely.

=Refill engine with oil through oil fill dipstick tube. Pour slowly, Do not overfill. For approximate capacity see "PRODUCT SPECIFICATIONS" on page 3 of this manual.

Use gauge on oil fill cap/dipstick for checking level. Be sure dipstick is in all the way for accurate reading. Keep oil at "FULL" line on dipstick.

OIL DRAIN PLUG

ENGINE

LUBRICATION

Only use high quality detergent oi! rated with API service classification SF or SG. Select the oil'sSAE viscosity grade according to your expected operating temperature.

SAE V SCOSITY GRADES

 

=20°

0 o

30 _

 

 

60 =

80 _

1000

-30 _

-20"

 

-10 °

0n

1'0

20 °

30 °

40 _

TEMPERATURE

RANGEANTICIPATEDBEFORENEXTOILCHANGE

 

 

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oi!.

OIL FILL

CAP/DIPSTICK

FIG. 15

18

Page 18
Image 18
Sears 917.25051 manual Custom Espo Ilities, Lubrication, To Clean Battery and Terminals

917.25051 specifications

The Sears 917.25051 lawn mower is a product that has made its mark in the gardening and landscaping sectors, renowned for its combination of robust features, advanced technologies, and user-friendly design. This model is particularly favored by homeowners who appreciate both efficiency and reliability when maintaining their lawns.

At the heart of the Sears 917.25051 is its powerful gas engine, which provides an impressive amount of torque and horsepower, making it suitable for a variety of grass types and terrains. The engine is complemented by an easy-start mechanism that minimizes the hassle of getting the mower up and running. This enables even novice users to quickly begin their mowing tasks with minimal fuss.

One of the standout characteristics of the Sears 917.25051 is its cutting deck, which boasts a generous width, allowing users to cover larger areas in less time. The cutting height is adjustable, providing homeowners with the flexibility to achieve their desired lawn length, whether aiming for a traditional manicured look or leaving grass slightly longer for increased resilience. The mower is equipped with sharp, durable blades engineered to deliver a clean cut, which is crucial for promoting healthy grass growth.

The technology used in the Sears 917.25051 also includes features aimed at enhancing user comfort and control. The ergonomic handle is designed for maximum comfort, reducing strain during extended use. The mower's lightweight construction makes it easy to maneuver, even in tight spaces, ensuring that users can navigate around flower beds, trees, and other landscaping elements without difficulty.

In terms of maintenance, the Sears 917.25051 is designed with user convenience in mind. The air filter is easily accessible, allowing for quick cleaning and replacement as needed. Additionally, the fuel tank features a transparent section, which helps users monitor fuel levels without having to open or remove the lid.

Durability is another notable aspect of the Sears 917.25051. Constructed with high-quality materials, this mower is built to withstand the rigors of regular use while retaining optimum performance. The wheel assembly is also robust, providing stability on uneven terrain and ensuring a smooth mowing experience.

In conclusion, the Sears 917.25051 lawn mower is an exceptional choice for homeowners seeking a blend of power, performance, and ease of use. Its combination of advanced features and reliable technology ensures that maintaining a beautiful lawn is an achievable task for anyone ready to take on the challenge. With proper care, this mower can serve its users well for many seasons to come.