Sears 917.25051 manual Checklist, Assembly, INSTALL MULCHER PLATE See Figs. 5A and 5B, Items

• • _ i_111i, T i i i iii -- , i

ASSEMBLY

' i i

INSTALL MULCHER PLATE

(See Figs. 5A and 5B)

-tnStall two latch hooks to mulcher plate using screw, washer, lock washer, and weld nut as shown.

NOTE: Pre-assemble weld nut to latch hook by inserting weld nut from the top with hook pointing down.

•Tighten hardware securely.

°Raise and hold deflector shield in upright position,

•Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

•Hook front latch into hole on front of mower deck.

,,Hook rear latch into hole on back of mower deck.

i i ,i iii, ii ' , ii

guard from mower. Raise and hold guard when attaching mulcher plate

and allow it to rest on plate while in

i & CAUTION: Do not remove discharge operation,

I i [ i IH i i !

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades, The mulcher blades are designed for discharging and bagging also.

i,	......	,	,
		WELD	NUT	HOOK POINTS
		FROM THE TOP		DOWN
		LOCK	'_t_
		WASHER
				LATCH
				HOOK
WELD_
NUT	_
				WELD
				NUT
LATCH				LOCK
HOOK				WASHER

i

DEFLECTOR

SHIELD

LATCH

HOOKS

FIG. 5B

,/CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCE AND SATISFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

v" All assembly instructions have been completed.

,/ No remaining loose parts in carton.

,/ Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

,/ Seat is adjusted comfortably and tightened securely.

,/ All tires are properly inflated. (For shipping purposes, the tires were overinflated at the factory).

,/ Be sure mower deck is properly leveled side-to-side! front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

,/ Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

,/ Check wiring. See that all connections are still secure and wires are properly clamped.

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA A TTENTION TO THE FOLLOWING IMPORTANT

ITEMS:

,/ Engine oil is at proper level•

¢Fuel tank is filled with fresh, clean, regular unleaded gasoline.

,/ Become familiar with all controls - their location and function. ©perate them before you start the engine.

,/ Be sure brake system is in safe operating condition.

10