CUSTOMER RESPONSIBmLITIES
FILL IN DATES |
|
|
|
| |||
AS YOU COMPLETE |
| ___ |
| ||||
REGULAR | SERVICE |
|
|
| |||
| Check | Brake | Operation | _ | 6## | ||
| Check | Tire Pressure | _ | 6#4 | |||
T | Check | for Loose | Fasteners | _ |
| ||
AR | Sharpen/Replace | Mower Blades |
| 6##4 | |||
C | Lubrication | Chart |
| _ | |||
T | Check | Battery | Level/Recharge |
|
| ||
0 | Clean | Battery | and Terminals |
| _ | ||
a | CheckTransaxle | Cooling |
| _4' | |||
| Adjust | Blade | Belt(s) Tension |
|
| ||
| Adjust Motion Drive Belt(s) Tension |
|
| ||||
| Check | Engine | Oil Level | _ | 6## | ||
| Change Engine | Oil | 6## | _1.2,3 | |||
E | Clean | Air | Filter |
|
| _2 | |
N | Clean Air Screen |
| _2 | ||||
G | Inspect Muffler/SparkArrester |
| 6_ | ||||
| Replace Oil Filter (if equipped) |
|
|
Nclean Engine Cooling Fins Replace Spark Plug
Replace Air Filter Paper Cartridge Replace Fuel Filter
1- Change more often when operating under a heavy load or in high ambient temperatures
2 - Service more olten when operating In dirty or dusly conditions
_._'jcb_._j_£._'5_"
6##
6#4
_#
6##5
6#45
6#4
6_1,2
_2
_ _4'
_2
$f
3 - If equipped with otl filter, change oil every 50 hours
4 - Replace blades more often when mowing in sandy soiI
5 - If equippedwithadjustablesystem
GENERAL RECOMMENDATBONS
The warranty on this vehicle does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must main- tain unit as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your uniL
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
Once a year you should replace the spark plug, clean
or replace air filter, and check blades and belts for wear, A new spark plug and clean air filter assure proper
BEFORE EACH USE
oCheck engine oil level,
°Check brake operation,, o Check tire pressure,
•Check for loose fasteners,
LUBRICATION | CHART |
Q SPtNDLEZERK | SPINDLEZERKQ |
| ,FRONT WHEEL (_) |
BEARING ZERK | BEARING ZERK |
CLUTCH
PIVOT(S)
PIVOTS
(_SAE 30 OR 10W30 MOTOR OIL API - SG
(_)GENERAL PURPOSE GREASE
(_) REFER TO CUSTOMER RESPONSIBILITIES "ENGINE" SECTION
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS VISCOUS LUBRI- CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
15 DERED GRAPHITE TYPE LUBRICANT SPARINGLY