CUSTOME RESPONSiBiLiTiES
MAINTENANCE | SCHEDULE |
FILL IN DATES |
|
AS YOU COMPLETE |
|
REGULAR SERVICE | SERVICE DATES |
|
Check Brake Operation
Check Tire Pressure
T i Check for Loose Fasteners
ASharpen!ReplaceMower Blades
C I Lubrication Chart
T I Check Battery,Level/Recharge
OClean Battery and Terminals
. Check Transaxle cooling
E!
Adjust Blade Belt(s) Tension
Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level
Change Engine Oil
Clean Air Filter
NClean Air Screen
GInspect Muffler/Spark Attester
JReplace Oil Filter (If equipped)
N
El Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Fitter Paper Cartridge
Replace Fuel Filter
Change more often when operating under a heaw load or in high ambient temperatures. - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive fu!l value from the warranty, operator must maintain tractor as instructed in this manual.
3 - tf equipped with oil filter, change oil every 50 hours.
4 - Replace blades more often when mowing in sandy soil.
5 - If equipped with adjustable system.
LUBRICATION CHART
(_)TIE ROD BALL JOINTS
Some adjustments wit! need to be made periodically to properly maintain your tractor.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.
Once a year you should replace the spark plug, clean or replace air filter, and check blades and belts for wear, A new spark plug and clean air filter assure proper
(_) FRONT WHEEL | ::::::: ::::: : | FRONT WHEEL Q |
SECTOR GEAR | ENGINE (_) |
TEETH |
|
BEFORE EACH USE
oCheck engine oil level. o Check brake operation.
,,Check tire pressure.
Check for loose fasteners.
IMPORTANT: DO NOT OIL OR GREASE THE PIVOT POINTS WHICH HAVE SPECIAL NYLON BEARINGS.
VISCOUS LUBRICANTS WILL ATTRACT DUST AND DI RT
THAT WILL SHORTEN THE LIFE OF THE SELF-
LUBRICATING BEARINGS. tF YOU FEEL THEY MUST
TRANSAXLE
FLUID
(_SAE 30 MOTOR OiL API. SG
(_) GENERAL PURPOSE GREASE
(_) REFER TO CUSTOMER RESPONSIBILITIES "ENGINE" SECTION OSPRAY SILICONE LUBRICANT (MOVE BOOTS TO LUBRICATE)
BE LUBRICATED, | USE ONLY A DRY, | POWDERED |
GRAPHITE TYPE | LUBRICANT SPARINGLY. | 15 |
