Sears 917.25953 Service And Adjustments, TO REMOVE MOWER See Fig, TO INSTALL MOWER See Fig

Models: 917.25953

1 30
Download 30 pages 33.74 Kb
Page 21
Image 21
SERVICE AND ADJUSTMENTS

SERVICE AND ADJUSTMENTS

:

H,,H',,,'H'I= 'l",' 11,1" I

111'111=

CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

Depress clutch/brake pedal fully and set parking brake.

o

o o

o

o

o

Place motion control lever in neutral (N) position.

Place attachment clutch in "DISENGAGED" position.

Turn ignition key "OFF" and remove key,

Make sure the blades and all moving parts have completely stopped.

Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

TRACTOR

TO REMOVE MOWER (See Fig, 21)

Mower will be easier to remove from the right side of tractor.

Place attachment clutch in "DISENGAGED" position_

,Move attachment lift lever forward to lower mower to its lowest position.

°Roll belt off engine pulley_

°Disconnect clutch rod from clutch lever by removing retainer spring_

,Disconnect anti-swaybar from chassis bracket by removing retainer spring.

Disconnect suspension arms from rear deck brackets by removing retainer springs,

°Disconnect front links from deck by removing retainer springs_

Raise lift lever to raise suspension arms. Slide mower out from under tractor_

IMPORTANT:

tF AN ATTACHMENT OTHER THAN THE

MOWER

fS TO

BE MOUNTED TO THE TRACTOR,

REMOVE

THE FRONT LINKS.

TO INSTALL MOWER (See Fig. 21)

Raise attachment lift lever to its highest position.

Slide mower under tractor with discharge guard to right side of tractor

Lower lift lever to its lowest position.

°install mower in reverse order of removal instructions_

ILEVER

CLUTCH

RETAINER

RETAINER

SPRING

ANTI-SWAYBAR

RETAINER

SPRINGS (BOTH SIDES)

FiG. 21

2'1

Page 21
Image 21
Sears 917.25953 owner manual Service And Adjustments, TO REMOVE MOWER See Fig, TO INSTALL MOWER See Fig, Tractor