•Idle fuel needle settina - With throttle control lever in slow position, turn idle fuel adjustment needle in (clockwise) until engine begins to die and then
turn out (counterclockwise) until engine runs rough. Turn needle to a point midway between those two positions.
•Recheck idle speed. Readjust if necessary.
ACCELERATION TEST -
•Move throttle control lever from slow to fast position. If engine hesitates or dies, turn idle fuel adjusting needle
out (counterclockwise) 1/8 turn. Repeat test and continue to adjust, if
necessary, until engine accelerates smoothly.
High speed stop is factory adjusted. Do not adjust - damage may result. IMPORTANT: Never tamper with the engine governor, which is factory set for proper engine speed. Overspeeding the engine above the factory high speed setting can be dangerous. If you think the
RIZED service center/department, which has proper equipment and experience to make any necessary adjustments.
Idle Speed
Adjusting
Screw "_
Idle Fuel
Adjusting- t
Needle
26
