Read these instructions and this manual in its entirety before you attempt to assemble or operate your new lawn mower, your new lawn mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper opera- tion of your lawn mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness. All parts such as nuts, washers, botts, etc., necessary to complete the assembly have been placed in the parts bag.

TO REMOVE LAWN MOWER FROM

CARTON

o Remove loose parts included with mower.

-Cut down two end corners of carton and lay end panel down flat,

oRemove all packing materials except padding between upper and lower handle and padding holding operator presence control bar to upper handle.

°Roll lawn mower out of carton and check carton thor- oughly for additional loose parts.

HOW TO SET UPYOUR LAWN MOWER

TO UNFOLD HANDLE (See Fig. 1)

iMPORTANT: UNFOLD HANDLE CAREFULLY SO AS NOT TO PINCH OR DAMAGE CONTROL CABLES.

°Raise handles until lower handle section locks into place in mowing position.

oRaise upper handle section intoplace on lower handle,

remove protective padding and tighten both handle knobs.

oRemove handle padding holding operator presence control bar to upper handle.

®Your lawn mower handle can be adjusted for your mowing comfort. Refer to "Adjust Handle" in the Service and Adjustment section of this manual.

NOTE: For shipping purposes, the rear wheels on your lawn mower are not adjusted to the same position as the front wheels. Before operating mower adjust all wheels to the same cutting height position.

OPERATOR PRESENCE

CONTROLBAR

UPPER HANDLE

LIFT UP

SIDE DISCHARGING (See Fig. 2B) -

=Mulcher plug must be installed into rear discharge opening of mower (see above instructions).

•Unlock closed discharge guard by lifting latch and allow guard to swing open to discharging position.

,Mower is now ready for discharging operation.

,To convert to mulching or bagging operation, dis- charge guard must be closed and locked securely.

SIMPLE STEPS TO REMEMBER

WHEN CONVERTING YOUR LAWN MOWER

FOR MULCHING -

,Rear mulcher plug installed.

,Side discharge guard closed and locked securely.

FOR REAR BAGGING -

=Rear mulcher plug removed.

•Grass catcher installed.

•Side discharge guard closed and locked securely.

FOR SIDE DISCHARGING -

•Rear mulcher plug installed.

•Side discharge guard unlocked and open.

CAUTION: Do not run your lawn mower

without rear mulcher plug in place or approved grass catcher in place. Never attempt to operate the lawn mower with the rear door removed or propped open.

MULCHER PLUG

FIG. 2A

LOWER

LIFT UP

MOWING POSITION

HANDLE

FIG. I

TO CONVERT MOWER

Your lawn mower was shipped ready to be used as a

DISCHARGE GUARD

mulcher. To convert to bagging or discharging:CLOSED POSITION REAR BAGGING (See Fig. 2A) -

o Open rear door and remove mulcher plug. Store muicher ptug in a safe place.

OPEN POSITION

o You can now install grass catcher.

•To convert to mulching or discharging operation, install

mulcher plug into rear discharge opening of mower.

B

FIG. 2B

Page 5 Page 7
Page 6
Image 6
Sears 917.372851 owner manual To Remove Lawn Mower from, Carton, HOW to SET Upyour Lawn Mower, To Unfold Handle See Fig
Page 5 Page 7

917.372851 specifications

The Sears Model 917.372851 lawn mower is a renowned outdoor power tool that has earned a reputation for durability, efficiency, and ease of use. This particular model caters to homeowners who seek a reliable and effective solution for maintaining their lawns. Packed with features, the 917.372851 seamlessly integrates advanced technologies to provide an exceptional mowing experience.

One of the standout features of the Sears 917.372851 is its robust and powerful engine. It is equipped with a dependable gas-powered engine, delivering ample torque and performance for cutting through thick grass and tough terrains. This engine ensures that users can tackle their mowing tasks quickly and efficiently, reducing the time spent on lawn maintenance.

The mower is designed with a cutting deck that typically measures 21 inches, offering a perfect balance between maneuverability and cutting width. This size allows it to navigate through tight spaces while still covering a substantial area in each pass. The adjustable cutting height feature is another key characteristic, allowing users to customize the height of their grass to suit personal preferences or seasonal requirements. This flexibility ensures that homeowners can maintain their lawns in the best possible condition throughout the year.

In terms of convenience, the Sears 917.372851 includes features such as easy-to-use controls which enhance usability for both experienced and novice users. The self-propelled nature of the mower reduces the physical effort required, thus making the mowing process less strenuous. Additionally, the model typically comes with a rear bagging system that effectively collects grass clippings, ensuring a clean and tidy finish to the lawn.

Another noteworthy aspect of this mower is its build quality. Constructed with sturdy materials, the Sears 917.372851 is designed to withstand the rigors of regular use. Users can expect consistent performance over the years, making this mower a valuable long-term investment.

The Sears 917.372851 is an excellent choice for anyone looking to achieve a well-manicured lawn with minimal effort. Its combination of power, versatility, and ease of use makes it a standout option in the lawn care market. Whether you have a small garden or a larger yard to manage, this model is engineered to meet the needs of a variety of users, offering a reliable solution for lawn care.
Top Page Image Contents