TO ASSEMBLE AND ATTACH GRASS
CATCHER (See Figs. 3A thru 4)
•Insert leg of tubular frame through front opening of grass catcher and thread frame into sewn hem of bag.
NOTE: Keep bag hem gathered on the straight leg of the tubular frame.
oWhen frame comes out the other end of sewn hem, immediately work the end of frame down inside the bag as shown in inset.
*S1idesewn hem evenly around the tubular frame until both ends of frame are exposed out of the front open- ing.
,Assemble lower frame to tubular frame as shown. Be
sure handte is outside of bag and frames are fufly seated as shown in inset.
•Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm water for a few minutes. If bag gets wet, let it dry before
using.
Close the flip lid. Flip lid must be closed while operating lawn mower.
,Lift the rear door on the mower housing and place the grass catcher frame onto the formed tabs on the rear door hinge bracket.
oThe grass catcher is secured to the lawn mower housing when the rear door is lowered onto the grass catcher frame.
Oo,,owomow°,
I_out clipping deflector or approved grass catcher in place. Never attempt
Ito operate the lawn mower with the rear door removed or propped open.
TUBULAR FRAME SEWN
HEM
SEWN HEM | FLIP LID |
FiG. 3A
LY
ames must
fully seated}
TUBULAR
FRAME//
FiG. 3B
LOWER FRAME HANDLE
\
GRASS
CATCHER
FRAME
FORMED
TABS
FiG. 4
7
