SERVIC AND
TO A#JUST HANDLE (See Figs. 16 Thru 18)
Your lawn mower handle can be raised or lowered for you r mowing comfort. Four (4) positions are available: high, medium high, medium low and low. Handles are shipped mounted in the medium low position.
oTo change from medium low to medium high position, the upper and lower handle sections will have to be turned over (See Fig. 16B).
oRemove the controls and operator presence control bar from the upper handle.
o Remove the starter rope guide from the lower handle.
o Remove hairpin cotters.
,Disconnect the lower handle from the handle brackets (See Fig, t8),
oTurn the handle over and reassemble the hairpin cotters that have been removed.
o Reassemble the starter rope guide.
oReassemble the controls and the operator presence control bar to the upper handle.
ADJ ENTS
SHIPPING POSITION
MEDIUM LOW | MEDIUM HIGH |
FIG. 16A | FIG. 16B |
CAUTION: The operator presence con- | HIGH |
brake engagement when control bar is troireeasedbar .mustDopivotnot overfreelytotightenpermitthebtadefas- teners holding the controls to the up- per handle.
°To change from medium low to high position only the upper handle section will have to be turned over (See Fig. 17A).
oTo change from medium low to low position, only the lower handle section will have to be turned over (See Fig. 17B).
ENGINE
ENGINE SPEED
Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. Ifyou believe that the engine is running too fast ortoo slow, take your lawn mower to an authorized service center! department for repair and adjustment.
CARBURETOR
Your carburetor has a
FIG. 17A | FIG. 17B |
LOWER HANDLE
SQUEEZE\x
TO REMOVE\
HANDLE
BRACKET
HAIRPIN COTTER
FIG. 18
!6
