Sears BT400 Table Of Contents, Warranty, Introduction, Showing Date Of Purchase, Specifications

389997 -00/BT400 Jig Saw 11/3/03 2:48 PM Page 2

TABLE OF CONTENTS
• Warranty / Introduction / Tool Specifications	2
• General Safety Rules	3-6
• Additional Safety Rules	6
• Assembly/Set-Up	7
• Operating Instructions	8-9
• Accessories	9
• Maintenance	9
WARRANTY

FULL 2 YEAR WARRANTY ON

BENCHTOP® VARIABLE SPEED JIG SAW

If this BENCHTOP® Jig Saw is found to be defective in

materials or workmanship within 2 years from the date of purchase,

Kmart will replace the tool, free of charge.

WARRANTY REPLACEMENT IS AVAILABLE BY RETURNING

THE TOOL TO THE NEAREST KMART STORE ALONG WITH RECEIPT

SHOWING DATE OF PURCHASE.

This warranty does not include damage/defects caused by or resulting from abuse, accidents, alterations or commercial use. It also does not cover accessories. This warranty does give you specific legal rights, and you may also have other rights which vary from state to state.

Kmart Corporation, 3100 Big Beaver Road, Troy, Michigan 48084

For repair / replacement parts after warranty has expired, call: 1-800-544-6986

INTRODUCTION

Your Jig Saw has many features that will make your job faster and easier. Safety, performance and dependability have been given top priority in the design of this tool, making it easy to maintain and operate.

CAUTION: Carefully read through the entire manual before attempting to use this tool. Be sure to pay special attention to the Warnings and Cautions on page 6 in this manual. If you use the tool properly and only for the operations for which it was intended, you can enjoy years of safe, dependable service from it.

SPECIFICATIONS:

Bevel Capacity	45 degrees
Strokes per Minute	800-3,200 SPM
Voltage	120 Volts
Cutting Stroke	11/16"

￿

2