Sears NTEX04911.0 user manual Avoid pinching, Wires

9.Orient the Upright (2) and the Top Shield (44) as shown. Slide the Top Shield upward onto the Upright.

Have a second person hold the Upright (2) and the Top Shield (44) near the Frame (1) until step 10.

Locate the wire ties in the Upright (2). Tie the lower end of one wire tie to the Main Wire (43) and to the Frame Pulse Wire (42). Tie the end of the other wire tie to the end of the Receiver Wire (40). Next, pull the upper ends of the wire ties upward out of the top of the Upright.

Tip: To prevent the wires from falling into the Upright (2), secure the wires with the wire ties.

10.Tip: Avoid pinching the wires. Slide the Upright (2) onto the Frame (1).

Attach the Upright (2) with four M10 x 16mm Screws (67) and four M10 Split Washers (100).

Tip: Tighten the two Screws in the front of the Upright, and then tighten the other two Screws.

Slide the Top Shield (44) downward and press it onto the Left and Right Front Shields (13, 14).

9

Wire Ties

	2 Wire
	Ties
	42
44	43

40 1

10

	Avoid pinching
	the wires
	67
	2
	100
44	1
	100
13, 14	67

10