Setting Up Your Cooktop
Burner and Grate Assembly
WARNING
Assemble the burners and grates only when the cooktop is cool.
1. Put the burner ring on the burner head of each burner as shown in Figure 1. Be sure to match the correct sizes. As you put each ring in place, line up the five tabs on the bottom of the ring with the five notches in the top of each burner head (see figure 2). Twist each ring back and forth slightly to make sure it is properly seated.
2. Put the burner cap for each burner over the top of each burner ring (see Figure 1). Be sure to match the correct sizes. The ridge around the bottom edge of the cap goes around the top of the burner ring.
3.Gently set the grates on top of the spill tray. Put the legs of each grate into the corresponding dimples as shown in Figure 1.
Figure 2 - Burner Ring Notches
Grate
Burner Cap
Burner Ring
Top Frame
Burner Head (Fixed)
Figure 1 - Burner and Grate Assembly
Figure 3 - Properly Assembled Burner
5
