Sears SRCD223 Playing a DVD Video Or AN Audio CD, Using the DVD Menus, Using the Title Menu

PLAYING A DISC

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD CD

Getting started

Turn on the power of the TV, amplifier and any other components which are connected to the DVD player. (Change the input system to suit the DVD player, and check that the sound volume is correct.)

1Press the POWER button.

¡The power will turn on.

2Press the OPEN/CLOSE button.

¡The disc loading tray will open.

3Place a disc into the tray.

¡Make sure the disc is sitting properly in the correct recess, with the label side up.

¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

¡With DVDs that use some titles for playback program signals, playback may start from the second title, or it may skip these titles.

¡During the playback of two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guidance menu which describes the contents of the disc or a selection menu for sound, language and other customized settings.

1Press the DISC MENU button.

¡The DVD menu will appear.

2Select the desired title.

¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3 Playback will start from the selected title.

4Press the PLAY button.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

¡When you playback the DVD which a title menu is recorded, it may appear on the screen. In this case, refer to “USING THE TITLE MENU”.

5Press the STOP button to stop play.

Notes

¡If you press the OPEN/CLOSE button in the TV/VCR mode or power-off, the DVD tray will open.

¡If you press the DVD side PLAY button in the TV/VCR mode or power off, you can start the DVD playback.

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD player or the disc.

USING THE TITLE MENU

DVD

With a DVD containing a title menu, you can select desired titles from the menu.

1Press the TITLE button.

¡The title menu will appear.

2Select the desired title.

¡Press the arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

CALLING UP A MENU SCREEN DURING PLAYBACK

For DVDs

¡Press the DISC MENU button to call up the DVD menu.

¡Press the TITLE button to call up the title menu.

Note

¡Contents of menus and corresponding menu operations may vary between discs. Refer to the manual accompanying the disc for details.

– 37 – EN

01A11