FOR TVs WITH COMPONENT VIDEO IN JACKS

Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual- ity pictures.

Note

¡The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR COMBI- NATION UNITS. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR COMBI- NATION UNITS, you still need to either connect the RF cable to the ANT-OUT jack of the DVD/VCR COM- BINATION UNITS and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig. 1). To connect the supplied RF cable, see “DVD/VCR TO TV CONNECTION” on page 14.

A/V-compatible

or wide screen TV

To COMPONENT VIDEO

INPUT jacks

To COMPONENT VIDEO

To Right (red) and Left (white)OUT jacks AUDIO INPUT jacks

To Right (red) and Left (white)

AUDIO OUTPUT jacks

 

 

DVD/VCR

COMPONENT

 

 

 

 

OUT

 

 

 

 

IN

VIDEO OUT

 

 

ANT - IN

L

 

Y

 

 

 

DVD/VCR

 

 

 

AUDO

AUDIO OUT

 

 

 

 

 

 

DIGITAL AUDIO OUT

 

R

L

Cb

S-VIDEO

 

PCM / BITSTREAM

 

 

OUT

ANT - OUT

 

 

 

 

COAXIAL

CH3 CH4

VIDEO

R

Cr

 

 

[Fig. 3]

CONNECTING TO AN AMPLIFIER EQUIPPED WITH COAXIAL

DIGITAL INPUT JACKS FOR DVD AUDIO ONLY

Use an audio coaxial digital cable (not included) for the audio connections.

Connect to an amplifier equipped with coaxial digital input jacks.

Amplifier equipped with coaxial digital

input jacks, MD deck, DAT deck, etc.

Notes

 

DVD/VCR

 

COMPONENT

 

 

OUT

 

 

 

IN

 

VIDEO OUT

 

ANT - IN

L

 

Y

 

 

DVD/VCR

 

 

AUDO

AUDIO OUT

 

 

 

 

DIGITAL AUDIO OUT

 

R

L

Cb S-VIDEO

 

 

 

 

 

OUT PCM / BITSTREAM

ANT - OUT

 

 

 

COAXIAL

CH3 CH4

VIDEO

R

Cr

 

To COAXIAL DIGITAL

To COAXIAL DIGITAL

AUDIO OUT jack

AUDIO INPUT jack

[Fig. 4]

 

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting them together.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR COMBINATION UNITS. ¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD disc using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital and

DTS to on)

Notes

¡To listen to TV sound and VHS Hi-Fi stereo video tapes through the audio system, you must make the analog audio connection outlined in Fig.6 on page 16.

– 15 –

EN

1L25

Page 15
Image 15
Sears SRD2900 owner manual For TVs with Component Video in Jacks