2.Remove the cap by turning it counterclockwise until it stops.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

3.Take the new cartridge out of its packaging and remove the protective cover from O-rings.

A

B

A. Protective cover

B.O-rings

4.Place the cap (removed in Step 2) on the new filter. Align the ridge on the cap with the arrow on the filter. Turn the cap clockwise until it snaps into place.

B

C

A

A. Eject button

B. Arrow on filter

C. Ridge on cap

5.Push the new filter into the opening in the base grille. As the filter is inserted, the eject button will depress. The eject button will pop back out when the filter is fully engaged.

6.Pull gently on the cap to check that the filter is securely in place.

7.Flush the water system. See “Flushing the Water System After Changing Filter.”

Flushing the Water System After Changing Filter

After connecting the refrigerator to a water source, flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for

5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) for an additional 2 minutes. This will flush air from the filter and water dispensing system. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

Using the Dispenser Without the Water Filter Cartridge

You can run the dispenser without a water filter cartridge. Your water will not be filtered.

1.Remove the filter by pressing the eject button and pulling on the cap. See “Changing the Water Filter” earlier in this section.

2.Remove the cap by turning it counterclockwise until it stops.

IMPORTANT: Do not discard the cap. It is part of your refrigerator. Keep the cap to use with the replacement filter.

3.With the cap in a horizontal position, insert the cap into the base grille until it stops.

4.Turn the cap counterclockwise until the cap slips into the attachment slot. Then, turn the cap clockwise until it is in a horizontal position.

NOTE: The cap will not be even with the base grille.

Ice Maker and Storage Bin

(on some models - Accessory)

Turning the Ice Maker On/Off

NOTE: Do not force the wire shutoff arm up or down.

The On/Off switch for the ice maker is a wire shutoff arm located on the side of the ice maker.

1.To turn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position.

2.To manually turn the ice maker off, lift the wire shutoff arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.

Increasing Ice Production Rate

The ice maker should produce approximately 7 to 9 batches of ice in a 24-hour period. If ice is not being made fast enough, turn the Freezer Control toward a higher (colder) number in half number steps. (For example, if the control is at 3, move it to between 3 and 4.) Wait 24 hours between each increase.

14

Page 13 Page 15
Page 14
Image 14
Sears T1KB2/T1RFKB2 manual Ice Maker and Storage Bin, On some models Accessory
Page 13 Page 15

T1KB2/T1RFKB2 specifications

Sears T1KB2/T1RFKB2 is a notable example of a home appliance line that has drawn attention from consumers for its reliable performance and innovative features. Designed for convenience and efficiency, these products represent a sophisticated blend of technology and usability that caters to the needs of modern households.

One of the main features of the T1KB2/T1RFKB2 is their energy efficiency. With growing awareness around energy consumption, these models have been engineered to minimize power usage without sacrificing performance. This not only contributes to lower utility bills but also aligns with environmentally conscious practices.

The T1KB2/T1RFKB2 comes equipped with advanced cooling technologies. This includes variable temperature settings that allow users to customize the cooling experience based on individual preferences or seasonal requirements. The units are designed to maintain consistent temperatures, ensuring optimal conditions for food storage. This consistency is crucial for prolonging the freshness and safety of perishable items.

In terms of design, both models boast an aesthetic that blends well with various kitchen layouts. With sleek, understated finishes, they provide a contemporary look that appeals to consumers. The layout of shelves and compartments within the units is thoughtfully designed to maximize storage space, making organization simpler for users.

Furthermore, these appliances incorporate advanced filtration systems that help in purifying the air inside the unit, ensuring that odors do not compromise the quality of food storage. This feature is particularly beneficial for households that store diverse food items.

Another characteristic of the T1KB2/T1RFKB2 is the user-friendly interface. With intuitive controls and easy-to-read displays, users can effortlessly navigate the settings to adjust temperatures or access different modes. This accessibility makes it suitable for all age groups, ensuring that the entire family can utilize its features without hassle.

Durability is also a hallmark of the T1KB2/T1RFKB2, with high-quality materials used throughout their construction. This ensures that they can withstand the rigors of daily use while maintaining their functionality over time.

In summary, the Sears T1KB2/T1RFKB2 blends energy efficiency, advanced cooling technologies, and user-friendly design in a durable package. These qualities make it a standout choice for families looking for reliable and effective home appliances.
Top Page Image Contents