Remove the Handles (optional)

1.Apply firm pressure with your hand on the face of trim. Slide top trim up and bottom trim down away from handle. Lift trim pieces off shoulder screws. See Graphic 1.

2.Remove handle screws and handles. See Graphic 1.

3.Move refrigerator into place. Replace handles as shown. See Graphic 1.

8.Remove the top right hinge cover and screws as shown. See Graphic 6. Do not remove screw A.

9.Lift the refrigerator door straight up and off of the bottom hinge.

10.It may not be necessary to remove the bottom hinge to move the refrigerator through a doorway. Both bottom hinges have similar construction.

■Remove the hinges as shown. See Graphic 7. Do not remove screw A.

Remove the Doors

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Open both refrigerator doors. Remove the base grille. Place hands along the ends of the grille. Push in on the top of the base grille and pull up on the bottom. See Graphic 2.

3.Close both doors and keep them closed until you are ready to lift them free from the cabinet.

4.If you have a dispenser (ice or water), disconnect the water dispenser tubing located behind the base grille on the freezer door side. See Graphic 3.

■Press the red outer ring against the face of the fitting and pull the dispenser tubing free.

■On some models, remove the tubing from hose clip.

5.Remove the top left hinge cover and screws as shown. See Graphic 4. Do not remove screw A.

6.Disconnect wiring:

■Disconnect wiring plug.

■Remove green ground wire screw to disconnect ground wires.

C

D

A

B

A. Do not remove screw A

B. Ground wires

C. Green ground wire screw

D. Wiring plug

7.Carefully lift freezer door straight up and off of the bottom hinge. See Graphic 5. The water dispenser tubing remains attached to the freezer door and pulls through the bottom left hinge. Make sure you protect the dispenser tubing from damage.

Replace the Doors and Hinges

1.Replace both bottom hinges, if removed. Tighten screws.

2.Carefully feed the dispenser tubing through the bottom left hinge before replacing the freezer door on the hinge. Assistance may be needed.

NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets to hold the doors in place while you are working.

3.Reconnect water dispenser tubing by pushing tubing into fitting until it stops and the red outer ring touches face of fitting. See Graphic 3. On some models, replace tubing in hose clip.

4.Align and replace the top left hinge as shown. See Graphic 4. Tighten screws.

WARNING

Electrical Shock Hazard

Reconnect both ground wires.

Failure to do so can result in death or electrical shock.

■Reconnect both ground wires.

■Reconnect wiring plug.

C

D

A

B

A. Do not remove screw A

B. Ground wires

C. Green ground wire screw

D. Wiring plug

5.Replace left hinge cover and screws.

6.Replace the refrigerator door by carefully lifting the door onto the bottom right hinge.

7.Align and replace the top right hinge as shown. See Graphic 6. Tighten screws.

8.Replace hinge cover and screws. Tighten screws.

9.Plug in refrigerator or reconnect power.

8

Page 7 Page 9
Page 8
Image 8
Sears T1KB2/T1RFKB2 manual Remove the Handles optional, Remove the Doors, Replace the Doors and Hinges
Page 7 Page 9

T1KB2/T1RFKB2 specifications

Sears T1KB2/T1RFKB2 is a notable example of a home appliance line that has drawn attention from consumers for its reliable performance and innovative features. Designed for convenience and efficiency, these products represent a sophisticated blend of technology and usability that caters to the needs of modern households.

One of the main features of the T1KB2/T1RFKB2 is their energy efficiency. With growing awareness around energy consumption, these models have been engineered to minimize power usage without sacrificing performance. This not only contributes to lower utility bills but also aligns with environmentally conscious practices.

The T1KB2/T1RFKB2 comes equipped with advanced cooling technologies. This includes variable temperature settings that allow users to customize the cooling experience based on individual preferences or seasonal requirements. The units are designed to maintain consistent temperatures, ensuring optimal conditions for food storage. This consistency is crucial for prolonging the freshness and safety of perishable items.

In terms of design, both models boast an aesthetic that blends well with various kitchen layouts. With sleek, understated finishes, they provide a contemporary look that appeals to consumers. The layout of shelves and compartments within the units is thoughtfully designed to maximize storage space, making organization simpler for users.

Furthermore, these appliances incorporate advanced filtration systems that help in purifying the air inside the unit, ensuring that odors do not compromise the quality of food storage. This feature is particularly beneficial for households that store diverse food items.

Another characteristic of the T1KB2/T1RFKB2 is the user-friendly interface. With intuitive controls and easy-to-read displays, users can effortlessly navigate the settings to adjust temperatures or access different modes. This accessibility makes it suitable for all age groups, ensuring that the entire family can utilize its features without hassle.

Durability is also a hallmark of the T1KB2/T1RFKB2, with high-quality materials used throughout their construction. This ensures that they can withstand the rigors of daily use while maintaining their functionality over time.

In summary, the Sears T1KB2/T1RFKB2 blends energy efficiency, advanced cooling technologies, and user-friendly design in a durable package. These qualities make it a standout choice for families looking for reliable and effective home appliances.
Top Page Image Contents