Manuals / Sebo / Household Appliance / Vacuum Cleaner

Sebo Airbelt D owner manual Vacuum Maintenance, Changing the Filter Bag Figures 22, 23, 24, 25

Models: Airbelt D

1 16
Download 16 pages 13.09 Kb
Page 11
Image 11

VACUUM MAINTENANCE

 

Always unplug vacuum from outlet

!

before dismantling any part of machine!

 

Changing the Filter Bag - Figures 22, 23, 24, 25 & 26

Tochange the filter bag (40), switch off the power and unplug the vacuum. Lift the cover release catch (#15, figure 22) and raise the filter bag cover (18). Seal the filter bag with the sealing cap (49). Lift the filter bag out of the holder by tilting the green collar (50) up and pulling it out of the holder as shown in figure 23.

Insert the green collar of a new filter bag down into the filter bag holder vertically as shown in figure 25. Line up the tabs (#52, figure 24) with the slots on the green collar (#51, figure 26) and gently push the collar down flat until the center U-shaped clip (#53, figure 24) moves all the way forward. Close the cover, making sure it snaps shut com- pletely. Do not re-use the filter bags.

The “bag full or clog” indicator works correctlyonly at full power. Check the status of the filter bag regularly at full power.

Note: The nature of the contents of the filter bag will affect the point at which it needs changing. Fine dust may require an earlier change even though the bag is not full. Fluff or hair allows air to pass through easily, so the filter bag may over fill before the “bag full” indicator turns orange.

52

53

 

Figure 24

Figure 25

Changing the AIRBELT - Figure 27

18

15

Figure 22

50

49 40

Figure 23

50

49

51

51

40

Filter Bags

Filterbox D

Part #8120AM

Figure 26

If damage occurs to the AIRBELT cover, it will need to be replaced. To remove the AIRBELT (7), pry off the clip (23) by inserting the tip of a slot-head screw- driver under the bottom side of the clip. Push outward carefully on the screw- driver until the clip pops off. Grasp the end of the AIRBELT cover (7) and pull - the AIRBELTcover will peel off. The foam bumper (54) remains on the vacuum. To replace the AIRBELT, insert the side ribs of the AIRBELT into the grooves (55). Start at the back, insert the rib of the AIRBELT cover into one groove (55), and while holding it down, stretch the AIRBELTcover around the foam (54) into the opposite groove (55). Continue around the vacuum. Secure the ends with the clip (23).

SEBO AIRBELT covers are available in a variety of colors and patterns. See your SEBO dealer for available selection.

7

54

23

55

54

55

AIRBELT Cover - Part #6047AM/01-08

Figure 27

Note: Never operate the vacuum with incorrectly attached filters or without filters, bag, AIRBELT or filter bag housing cover (18). Do not re-use filter bags. Do not wash and re-use filters.

11

Page 10 Page 12
Page 11
Image 11
Sebo Airbelt D owner manual Vacuum Maintenance, Changing the Filter Bag Figures 22, 23, 24, 25, Changing the Airbelt Figure
Page 10 Page 12

Airbelt D specifications

The Sebo Airbelt D is a high-performance vacuum cleaner known for its exceptional cleaning efficiency, robust design, and user-friendly features. Specially engineered for both home and professional cleaning environments, the Airbelt D offers a combination of powerful suction and advanced filtration, making it a popular choice among consumers.

One of the standout features of the Sebo Airbelt D is its impressive suction power. The vacuum is equipped with an efficient motor that delivers strong airflow, which helps in picking up dirt, dust, and pet hair from various surfaces, including carpets, hard floors, and upholstery. The Airbelt D is designed to clean both low-pile and high-pile carpets effectively, ensuring a thorough clean across all flooring types.

A notable characteristic of the Sebo Airbelt D is its Airbelt technology. The vacuum's unique bumper system consists of a soft, cushioned material encircling the machine, protecting furniture and walls from scratches and damage when maneuvering around corners and obstacles. This feature enhances the vacuum's usability while maintaining the integrity of the surrounding environment.

The Sebo Airbelt D also incorporates a high filtration system, featuring a hospital-grade microfilter and a pre-motor filter. This ensures that 99.9% of allergens and particles as small as 0.3 microns are captured, providing cleaner air and making it an excellent choice for allergy sufferers. The vacuum's design allows for easy maintenance and filter replacement, ensuring optimum performance over time.

Users will appreciate the ergonomic design of the Sebo Airbelt D, which includes a comfortable handle and a flexible hose that extends easily for reaching difficult areas such as stairs or under furniture. The vacuum also features a variety of attachments, including a crevice tool, upholstery nozzle, and a dusting brush, allowing for versatile cleaning tasks throughout the home or office.

With a range of onboard tools and a long power cord, the Sebo Airbelt D provides extended cleaning reach, reducing the need to frequently switch outlets during cleaning. Its durable construction is designed for longevity, making it a worthwhile investment for anyone seeking a reliable vacuum cleaner.

In summary, the Sebo Airbelt D combines powerful suction, advanced filtration technology, and user-friendly features in a robust and versatile design, making it an exceptional choice for those looking to achieve superior cleaning results across a variety of surfaces while maintaining a healthier indoor environment.