Sebo Airbelt D owner manual Trouble-Shootingguide

TROUBLE-SHOOTING GUIDE

!Always unplug vacuum from outlet before dismantling any part of the machine!

PROBLEM	REASON		SOLUTION
Does not turn on	1. Telescopic tubenot insertedproperly.		1.	See page 7.
	2.	Not plugged into working outlet.	2.	Use another outlet.
	3.	Cable worn.	3.	Replace cable.
	4.	The power control button	4.	Set power control button to “+”
		switch is set to “-” (“off” position).		position. See page 9.
Bag full or clog light on	1. Bag full.		1.	Replace filter bag. See page 11.
Bag full or clog light on
& machine shuts off	2. Clog in hose, telescopic tube,		2.	See Clog Removal on page 13.
		brush or head, or entrance to		Users with clog in power head
		filter bag.		attachment: refer to clog removal
				in the ET-1, ET-2 or DISCO owner’s
				manual.
	3.	Hospital-grade micro filter dirty.	3.	Replace hospital-grade micro filter.
				See page 12.
	4.	Motor filter dirty.	4.	Replace motor filter. See page 12.
Does not pick up	1. Hose/handle assembly not		1.	Re-insert hose/handle assembly
		correctly inserted.		making sure that it is lined up
				properly and is snapped into
				place. See page 7.
	2.	The power control button	2.	Set power control button to “+”
		switch is set to “-” (“off” position).		position. See page 9.
	3.	Filter bag cover not closed.	3.	See below.
Filter bag door won’t	1. Filter bag cover not fully closed.		1.	Re-insert bag. Lock the cover
fully close				down firmly. See page 11.
	2.	Bag not inserted properly.	2.	Re-insert bag. Lock the cover
				down firmly. See page 11.
	3.	Motor filter not properly	3.	Remove the filter bag cover (18) and
		inserted.		make sure the motor filter is seat-
				ed firmly in place all the way around
				the rim. See page 12.

14