ENFORCER
Audible and Visual Signals Chart
Transmitter |
|
| Receiver Display | ||
Input |
|
| Audible / Vibrator | ||
ID | Page LED | Zone LED | |||
| Indicator | ||||
|
|
|
| ||
| Positive Trigger | Green | Green | Groups of 9 | |
| Negative Trigger #1 | Green | Red | Groups of 9 | |
Green | Negative Trigger #2 | Green | Orange | Groups of 9 | |
| Manual Page | Green | Green | 3 groups of 3 | |
| Power ON | Green | None | 3 groups of 3 | |
| Positive Trigger | Red | Green | Groups of 9 | |
| Negative Trigger #1 | Red | Red | Groups of 9 | |
Red | Negative Trigger #2 | Red | Orange | Groups of 9 | |
| Manual Page | Red | Green | 3 groups of 3 | |
| Power ON | Red | None | 3 groups of 3 | |
| Positive Trigger | Orange | Green | Groups of 9 | |
| Negative Trigger #1 | Orange | Red | Groups of 9 | |
Orange | Negative Trigger #2 | Orange | Orange | Groups of 9 | |
| Manual Page | Orange | Green | 3 groups of 3 | |
| Power ON | Orange | None | 3 groups of 3 |
Operation
Receiver Switch Settings
1
∙ : Beeping only
Trigger Duration
ON: Vibration only | OFF: Receiver off |
∙The transmitter will transmit the page signal for a cycle of about 30 seconds, whether or not the triggered zone is reset. If the same zone remains triggered, the transmitter will not start a new transmission cycle. However, a new cycle will begin once another
Manual Paging
∙When triggered by the manual page button the receiver will beep (or vibrate) continuously for 1 minute in 3 groups of 3.
∙The Page LED will indicate which transmitter is sending the signal (Green, Red, or Orange).
∙The Zone LED will flash green.
∙Press the ON/ /OFF button after 30 seconds to stop the indicator.
Power-On Paging
∙When the transmitter is connected to power the receiver will beep (or vibrate) continuously for 1 minute in 3 groups of 3.
∙The Page LED will indicate which transmitter is sending the signal (Green, Red, or Orange).
∙The Zone LED will remain blank.
∙Press the ON/ /OFF button after 30 seconds to stop the indicator.
6 |