ENFORCER
Troubleshooting
No page signal | ∙ | Check that all connections are securely made |
| ∙ | Check that the antenna is securely fastened |
| ∙ Check the receiver batteries | |
| ∙ Possibly out of range – Move antenna to better position | |
| ∙ Make sure the antenna selection switch is in the correct | |
|
| position |
| ∙ Check that the transmitter has been properly learned | |
|
|
|
Receiver only outputting vibrate/beep | ∙ | Check that the receiver is in the correct alert mode |
| ||
Also Available from | ||
FCC COMPLIANCE STATEMENT
Information to the user: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense.
WARRANTY: This
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason
The sole obligation of
NOTICE
The information and specifications printed in this manual are current at the time of publication. However, the
Copyright © 2012
Website: | |
16842 Millikan Avenue, Irvine, CA 92606 | |
Tel: |
PIHKK2
8 |