10 - 2 ADJUSTING OR REPLACING THE VOLUME
Check Volume values in the Test Mode.
Since work is performed inside the energized cabinet, be very careful not to touch undesignated portions. Touching places not specified can cause electric shock or short circuit.
ADJUSTMENT
1Take out the 2 truss screws and remove the Front Cover from the Accel. & Brake unit.
2Loosen the screw which secures the Potentiobase, and adjust the Volume Value by moving the Base.
3 Secure the Potentiobase.
4In the INPUT TEST screen, check to see if the volume value varies in accordance with operation of the pedal.
