Input Test

Page 1 of 1

[Table of Contents] [Previous Page] [Next Page]

8-6 INPUT TEST

When INPUT TEST is selected, the monitor will show the following, allowing you to watch the status of each switch and the value of each V.R. of the CONTROL PANEL.

On this screen, periodically check the status of each switch & V.R.

zBy pressing each switch, if the display on the right-hand side of the name of each switch changes to ON from OFF, the SW and the wiring connections are satisfactory.

zTo check CHUTE 1 & CHUTE 2 coin switches, open the COIN CHUTE DOOR and insert a coin

(s) from the coin entry.

zTo return back to the MENU mode, simultaneously press VR1 & VR2, or press the TEST SW.

FIG. 8.6 INPUT TEST

An appropriate value of each V.R. is as follows:

HANDLE:

Under 2DH

<-- 7D~83H -->

Over D3H

 

left

(Centering position)

right

ACCEL:

Under 30H

--->

Over COH

BRAKE:

Under 30H

--->

Over D2H

 

(the pedal released)

 

(the pedal stepped)

http://www.sauservice.com/manuals/Daytona%20Folder/DDhtml/DD26.html7/12/2005

Page 20
Image 20
Sega DLX owner manual Handle, Accel, Brake