Seiko 7T82 manual Troubleshooting, English, Possible causes, Solutions, purchased

English

TROUBLESHOOTING

Trouble	Possible causes
The watch stops operating.	The battery has run down.
The small second hand moves at two-	The battery nears its end.
second intervals.
The watch temporarily gains or loses	The watch has been left or worn in extremely
time.	high or low temperatures.
	The watch has been left close to an object with a
	strong magnetic field.
	You drop the watch, hit it against a hard surface,
	or wear it while playing active sports. The watch
	is exposed to strong vibrations.
The STOPWATCH hands do not return to	The watch has been affected by magnetism or
the “0” position when the stopwatch is reset.	exposed to strong shocks or vibrations.
The inner surface of the glass is clouded.	Moisture has entered the watch because the
	gasket has deteriorated.
The date changes at 12 o’clock noon.	AM/PM is not properly set.

	English
Have the battery replaced with a new one immediately by the retailer from whom the watch was
Solutions
purchased.

Return the watch to a normal temperature so that it works accurately as usual, and then reset the time. The watch has been adjusted so that it works accurately when it is worn on your wrist under a normal temperature range between 5 ºC and 35 ºC.

Correct this condition by moving and keeping the watch away from the magnetic source. If this action does not correct the condition, contact the retailer from whom the watch was purchased.

Reset the time. If the watch does not return to its normal accuracy after resetting the time, contact the retailer from whom the watch was purchased.

Reset the stopwatch hands to the “0” position. Follow the procedure in "TIME AND CALENDAR SETTING AND STOPWATCH HAND POSITION ADJUSTMENT."

Contact the retailer from whom the watch was purchased.

Advance the hour hands for 12 hours to correctly set the time and date.

*In the event of any other problem, please contact the retailer from whom the watch was

24 purchased. 25