Seiko 7T82 manual How To Use The Stopwatch, How to read the stopwatch hands, English

HOW TO USE THE STOPWATCH

•Reading the 1/100-second and 1/10-second hands requires extra attention.

English	● The stopwatch features a 40-minute dial with a retrograde minute hand.
	● The stopwatch can consecutively measure up to 120 minutes in 1/100-second
	increments. When the measurement reaches 120 minutes, the stopwatch auto-
	matically stops counting.
	● Split time measurement is possible.
	● After 3 minutes of timing from a start, the STOPWATCH 1/100-second and 1/10-
	second hands remain pointing to the “0” position until the watch is stopped or
	split time measurement is made, at such a time, they move to display the

9 0 1

8 2

7 3

6 5 4

*The display illustrated at the left should be read as “19,” not "29." When the 1/100-second hand is moving toward larger numbers, the 1/10 second hand comes close to the next marker, which may cause you to wrongly read the hands as "29."

English

measured time. They start to move for a maximum of three minutes after the

watch is restarted or the split time display is released.

<How to read the stopwatch hands>

The time measured is indicated by the four stopwatch hands below.

<Remarks on the STOPWATCH minute hand movement>

•	When the minute counting reaches 40 minutes, the STOPWATCH minute hand
	immediately returns and continues counting from 41 minutes onward. The minute
	counting is repeated in the same manner for another rotation, up to 120 minutes,
	at that time the stopwatch automatically stops.
•	The final position of the STOPWATCH minute hand, after completing 120 minutes

STOPWATCH 1/100-second hand

9	0	1
8		2
7		3
6	5	4

20

10 30

0 40

STOPWATCH minute hand

12

STOPWATCH 1/10-second hand

STOPWATCH second hand

of counting, is illustrated below.

	20
10	30
0	40

• Before starting to use the stopwatch again, make sure to reset the stopwatch by

pressing Button B.

13