Seiko 7T84 brochure Necessary procEdure after battery change, Hand Position Adjustment

English

Necessary procEdure after battery change

After the battery is replaced with a new one, or when an abnormal display appears, follow the procedures below to reset the built-in IC. The watch will resume its normal operation.

•HOW TO RESET THE IC

1.Pull out the crown to the second click.

2.Press button A and B at the same time.

3.Push the crown back in to normal position and check if the hands move as normal.

HAND POSITION ADJUSTMENT

(mode indicator, center hand, hands of the small watch)

uHand position adjustment is a procedure required when the hands are not correctly aligned for use in the STOPWATCH or TIMER functions, or after the battery is changed or the built-in IC is reset. For example, when the hands are not pointing to the 0 position even after the stopwatch is reset. After hand position adjustment is carried out, it is necessary to set the time.

•How to adjust the positions of the mode indicator, center hand and the hands of the small watch

English

A

CROWN

B

*Resetting the IC will initialize the watch. Before starting to use the watch, it will be necessary to set the time and adjust the STOPWATCH hands to the 0 position.

Refer to HAND POSITION ADJUSTMENT and TIME MODE sections of this manual.

E	5
MI
T

	0TMRC
1		HR	L
6
		A
			M
			L
			O
	MODE SELECT		C

CROWN Pull out to second click.

The small second hand will stop on the spot.

* If the crown is pulled out while the timer or stopwatch is measuring time, the measurement will be forcibly terminated and the timer or the stopwatch will be reset.

34 35