Sekonic L-758DR manual Camera Exposure Profiling

7. Camera Exposure Profiling

4)Setting Mid.Tone Value from Memorized Values

After taking three or more reflected Spot measurements, select which memorized value on the analog scale should be the Mid-Tone value. First enter the memory recall mode by pressing and holding the MODE button, while pressing the Memory button. Select one of the memorized values by rotating the Jog wheel and press the MID.TONE button to set it as the Mid-tone value.

Memory button

Memory recall mode Select desired memorized Press MID.TONE to set

value as Mid.Tone

NOTE:

•Depending on the lighting conditions, type of photographic equipment and the exposure standard adopted your exposure result may differ. Please test your setup before shooting under any conditions.

•It is possible that your set exposure values are not the desired effect for the given subject matter or shooting situation. Under these situations, please compensate the values to achieve the desired effect. See section 2-2 "Manual Exposure Profile Input" (See page 45)

-51-