FCC & IC compliance information
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
To Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separation between the equipment and receiver.
*Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules and also with
Model | FCC ID | IC | Note | |
Number | Number | |||
|
| |||
|
|
|
| |
|
|
| The approval of this rule is obtained under the | |
condition that radio transmitter module is installed | ||||
|
|
| in the meter. | |
|
|
|
| |
|
|
| The approval of this rule is obtained with optional | |
|
|
| radio transmitter module | |
|
|
| radio transmitter module into the meter, be sure to | |
| put the sticker indicating FCC ID and IC number on | |||
|
|
| the back of meter which is enclosed in the package | |
|
|
| of the module. For details, please refer to the | |
|
|
| instruction manual of transmitter module. | |
|
|
|
|
