Installation Instructions

1 Attention: The new appliance may only be installed and connected by

a registered expert.

Please comply with this. If you do not, any damage resulting is not cov- ered by the warranty.

1 Safety information for the installer

The electrical installation is to be set up so that the appliance can be isolated from the mains with a minimum 3mm all-pole contact sepa- ration.

Suitable separation devices include e.g. cut-outs, fuses (screw fuses are to be taken out of the holder), RCD’s and contactors.

The site must provide a connection to the electrical supply by means of a socket such that the socket is accessible and outside the coordi- nation space.

The built-in unit must meet the stability requirements of DIN 68930.

Built-in ovens and built-in cooking surfaces are fitted with special connection systems. For safety reasons, they must only be combined with appliances from the same manufacturer.

50

Page 50
Image 50
Electrolux KM9800E manual Safety information for the installer, Registered expert