Setting up the conference system

To connect the conference units to the central unit:

CAUTION

Product damage due to an unsuitable power supply!

An unsuitable power supply can damage network devices with RJ 45 plugs that are connected to the connection sockets PORT I and PORT II.

￿Only connect the ADN C1 and ADN D1 conference units to the connection sockets PORT I and PORT II.

EN DE

IT ES FR

IN –– AUDIO –– OUT

 

IN –– AUDIO –– OUT

 

PORT II

PORT I

PORT II

PORT I

2x 52.8V

1.75A

2x 52.8V

1.75A

7

6

IN –– AUDIO –– OUT

 

 

 

 

 

PORT II

PORT I

 

 

 

 

 

 

100-240V~

 

 

 

52.8V

1.

50/60Hz 240W

 

 

 

 

 

IN

OUT

IN

OUT

8 9

￿

￿

￿

￿

￿Use a system cable to connect the IN socket ￿ of the first conference unit to the PORT II socket 8 or PORT I socket 9 of the central unit (see above).

￿Use a system cable to connect the OUT socket ￿ of the first conference unit to the IN socket ￿ of the second conference unit.

￿Repeat these steps for the remaining conference units.

You can use optional cable holders for guiding the system cables. For further information, refer to the detailed instruction manual.

Connecting external audio devices to the central unit

To output the floor channel via an external audio device:

￿Use an XLR cable to connect the OUT audio output 7 of the central unit to an external audio device.

To connect an external audio source and to feed its signals to the floor channel:

￿Use an XLR cable to connect the external audio source to the IN audio input 6 of the central unit.

NL RU

JP ZH

DK

NO SE FI

ADN CU1 9