Preparing the ADN CU1 central unit for use

ADN CU1

Conference Manager software

1

2

 

 

 

 

 

 

 

 

The “Conference Manager” software can be run in two different ways:

1.As a program on the central unit’s built-in PC.

You have to connect a screen, keyboard, and mouse to the central unit (see page 13).

2.As a program on a Windows PC.

You have to install the “Conference Manager” software on the PC and integrate the PC together with the central unit in a network (see page 13).

Input and output of audio signals

Via XLR sockets, you can feed audio signals to the floor channel or output the floor channel.

For recording a conference on a USB mass storage device, you can use the recording function of the ADN CU1 central unit, which saves the floor channel and all channels of the conference units as audio files in wav format.

Integration into a media control system

The ADN conference system can be completely integrated into a media control sys- tem. You can monitor and control all functions of the conference system via the programmable commands of your media control system. For information on the integration into a media control system, refer to the detailed instruction manual “ADN Conference System”).

Preparing the ADN CU1 central unit for use

Setting up the central unit on a flat surface

￿Make sure that the air vents are not covered or blocked.

￿Place the central unit on a flat surface as shown.

For information on how to mount the central unit into a 19” rack, refer to the detailed instruction manual “ADN Conference System”.

Connecting the central unit to the mains

CAUTION

Product damage due to unsuitable mains cables or power outlets!

An unsuitable power supply can damage the product.

￿Only use the mains cable (supplied) for connecting the product to the mains.

￿Only use multi-outlet power strips or extension cables with protective ground contacts.

￿Only use mains cables with a 3-pin connector.

￿ First connect the mains cable (supplied) to the mains socket D.

￿ Connect the mains cable to the mains power supply. The ADN CU1 central unit is now ready for operation.

100-240V~ 50/60Hz 240W

D

ADN CU1 9