Sennheiser ADN CU1 manual 19

Configuring the conference system

Display	Function of the menu item		Option/display
“Floor/Loudspeakers” menu
“Floor/Loudspeakers Volume” Adjusts the floor channel volume (“Floor/Loudspeakers”)					Floor/Loudspeaker Volume
										16
									16		No
					“00” ... “32”
“Floor/Loudspeakers Equalizer”	Adjusts the tone color of the floor channel				Floor/Loudspeaker Equalizer
										+02 dB
										–03 dB
										+05 dB
											No
			“−12 dB” ... “+12 dB”
“Feedback Suppression” menu
“Loudspeaker”	Changes the volume adjustment of the conference units’					“Off”
	built-in loudspeakers in order to increase the max.		low (approx. +2 to +3 dB)
	possible volume while the risk of feedback due to the				“Low Intensity”
	increased volume is reduced.		high (approx. +5 to +6 dB)
“XLR Out”	Changes the volume adjustment of the OUT audio output				“High Intensity”
	in order to increase the max. possible volume while the
	risk of feedback due to the increased volume is reduced.
“Conference Recording” menu
“Record”	Starts/stops the audio recording of the conference				“On”/“Off”
	channels on a USB mass storage device
“Recording status”	Provides information on the status of the audio recording				Recording Status
	and on the available memory space on the USB mass			Status			:		Off
				Free Space			:		123456 MB
	storage device
											No
“System Menu”
“Units”	Displays the type and number of the conference units				Units
	connected to the connections PORT of the ADN CU1				System	: 216 D1			06 C1
					CU	:	00 D1		04 C1
	central unit or ADN PS power supplies
					PS01	:	29 D1		01 C1
											No
“Topology”	Displays the type of topology connected to the ADN PS				Topology
	power supplies (simple cabling	or redundant ring			PS01.I.1 :
					PS01.I.2 :		– –
	topology )
					PS01.II	:
											No
“Diagnostics”	Calls up the “Diagnostics” submenu							–
“Versions”	Calls up the “Versions” submenu							–
“Diagnostics” menu
“System Load”	Provides information on the current supply (A), voltage				System Load
	supply (V) and power (P)				CU.I :		– – A		 V
					PS07.II.1 :			A	– – V
					PS07 :		 P
											No
“Temperature”	Provides information on the temperature status				Temperature
				CU		:	
				PS07		:	
				PS11		:	
											No
“Bus Statistics”	Provides information on the status of data transmission/				Bus Statistics
	errors			Error Indication :						☺
				Break Count			:		1
											No

18 ADN CU1