Cleaning the diversity receiver
Using freely selectable receiving frequencies
You can also freely select the receiving frequencies and store these frequencies in the frequency banks “U1” to “U6”.
It might be that the freely selected frequencies are not intermodulation
If you are using frequencies from the frequency banks “U1” to “U6”, it might be that the receiving frequencies are not intermodulation
Contact your Sennheiser partner who will be pleased to calculate
Set each diversity receiver to the same frequency bank (“U1” to “U6”).
On one of the receivers, select a channel within this frequency bank and assign this channel a receiving frequency (see page 25).
Synchronize a transmitter with this receiver (see the instruction manual of the transmitter).
OR:
Manually set the transmitter to the same frequency bank and channel that you set on the receiver.
Repeat for the remaining transmitters and receivers as described above.
Cleaning the diversity receiver
CAUTION! Liquids can damage the electronics of the receiver! Liquids entering the housing of the device can cause a
Keep all liquids away from the receiver.
Do not use any solvents or cleansing agents.
Use a cloth to clean the diversity receiver from time to time.
30