|
| Accessories | |
|
|
| |
Problem | Possible cause | Possible solution |
|
|
|
|
|
Audio signal has | Transmitter sensitivity | Adjust the transmitter |
|
a high level of | is adjusted too low | sensitivity correctly |
|
background |
| (see the instruction manual |
|
noise |
| of the transmitter). |
|
|
|
|
|
Audio signal is | Transmitter sensitivity | Adjust the transmitter |
|
distorted | is adjusted too high | sensitivity correctly |
|
|
| (see the instruction manual |
|
|
| of the transmitter). |
|
|
|
|
|
No access to a | During scanning, | Set the transmitter operating |
|
certain channel | an RF signal has | on this channel to a different |
|
| been detected on | channel and redo the |
|
| this channel and | frequency preset scan |
|
| the channel has | (see page 21). |
|
| been locked |
|
|
| During scanning, a | Switch the transmitter off |
|
| transmitter of your | and redo the frequency preset |
|
| system operating on | scan (see page 21). |
|
| this channel has not |
|
|
| been switched off |
|
|
|
|
|
|
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local Sennheiser partner for assistance.
To find a Sennheiser partner in your country, search at
www.sennheiser.com under “Service & Support”.
Accessories
The following EK 2000 IEM accessories are available from your specialist dealer:
Cat. No. | Accessory |
009950 BA 2015 accupack
009828 L 2015 charger
500432 IE 4 earphones
33