Sennheiser EK 2000 IEM manual 27

Adjusting settings via the operating menu

￿ Press the rocker button to set the channel. SET ￿ Press the SET button to confirm the channel. The frequency (MHz section) is highlighted.

￿Set the desired frequency (MHz and kHz section) as described in the previous chapter.

Activating/deactivating the pilot tone evaluation – “Pilot Tone”

	Advanced Menu		Pilot			Pilot
	Pilot Tone			A c t i v e		I n a c t i v e
	A c t i v e
Call up		Select the desired			Store the setting
“Pilot Tone”		setting

“Stored”

The pilot tone encodes the stereo signal of the transmitter and supports the diversity receiver’s squelch function, thus protecting against interference due to RF signals from other devices. When set to stereo operation, the transmitter adds an inaudible pilot tone to the transmitted stereo signal. The receiver detects and evaluates the pilot tone.

￿When the transmitter is set to mono operation, deactivate the pilot tone evaluation on the.

Display	Meaning
No icon	The pilot tone evaluation is deactivated.
	The pilot tone evaluation is activated. The receiver does not
	receive a pilot tone because the transmitter operates in
	mono mode.
	The pilot tone evaluation is activated. The receiver receives
	a pilot tone.

Adjusting the limiter – “Limiter”

	Advanced Menu		Limiter			Limiter
	Limiter			O f f		– 6 d B
	O f f
Call up “Limiter”		Select the desired			Store the setting
		setting
				“Stored”

26