7 Selecting the mains voltage
Before you plug the mains connector into the mains, please check first of all that the receiver is set to the correct mains voltage!
You can change the mains voltage by removing the fuse holder with the inserted fuse , turning it through 180° and inserting it again . The set voltage can be seen at the top of the fuse holder.
Mains connection
Insert the supplied mains cable into socket | on the receiver and pass the cable through the cable | |
grip . |
|
|
Because of the cable grip, the cable cannot slip out of socket | and interrupt operation. | |
Note
A cable grip is particularly important when the receiver is permanently rack mounted. Inside the rack there are often a large number of cables - a cable grip prevents the cables from pulling each other out.
47
