Putting the EZX 80 into operation
1:20 h
Putting the EZX 80 into operation
Charging the headset
WARNING
Danger of injury!
Wearing or using the headset during charging can cause burns and injuries.
During charging, place the headset on a table.
A complete charging cycle takes about 1 hour and 20 minutes. Before using the headset for the first time, charge the rechargeable battery for a complete charging cycle without interruption.
A charging time of ... | corresponds to a talk time of ... |
approx. 10 min | approx. 1 h 30 min |
approx. 20 min | approx. 2 h 40 min |
approx. 40 min | approx. 5 h 20 min |
approx. 60 min | approx. 7 h 30 min |
approx. 80 min | approx. 10 h |
|
|
1Take off the headset and switch it off (see page 14).
2Connect the smaller plug of the charging cable to the USB socket of the EZX 80.
3Connect the USB plug of the charging cable to the USB socket of your computer.
If you are using the optional charging accessories*: Connect the USB plug of the charging cable to the power supply unit or to the USB car charger adapter.
4The rechargeable battery is being charged. When charging is complete, the LED goes off.
1
2
OFF 
3 | 4 |
*
**
*only supplied with 3in1 version
**only supplied with 3in1 and 2in1 versions
100 % |
5 min
