Using the EZX 80
Making calls using the headset
Making a call
Dial the desired number on your mobile phone. You hear a beep in the headset.
If your mobile phone does not automatically transfer the call to the headset, simply press the
Accepting/rejecting/ending a call
When your EZX 80 is connected to a mobile phone and you receive a call, you hear a ring tone in the headset and the LED flashes blue every
2seconds. If the headset battery is low, the LED flashes red instead of blue. If you listen to music, the music is stopped until you end the call.
When you receive a call and your headset is switched off, simply switch your headset on to accept the call.
Press the
Duration Function | Beep(s) |
|
|
Accepts a call
2s | Rejects a call |
Ends a call
Transfering the call to/from the headset
Once a connection is established, you can transfer the call to/from the headset.
Press the
Duration Function | Beep(s) |
| Transfers a call from the headset to |
2s | the mobile phone |
|
Transfers a call from the mobile phone to the headset
EZX 80 17