![Blockschaltbild HMEC 25-6A](/images/new-backgrounds/10292/102929x1.webp)
Blockschaltbild HMEC 25-6A
Technische Daten NoiseGard™ HMEC
Kopfhörer
boom |
microphone |
microphone |
amplifier |
headphone | compensation |
capsule (left) | microphone (left) |
compensation
circuit (left)
compensation |
| headphone |
microphone (right) |
| capsule (right) |
|
|
|
|
|
|
|
| compensation |
|
| circuit (right) |
Wandlerprinzip | dynamisch, geschlossen, ohraufliegend |
Übertragungsbereich | 16 Hz - 22 kHz |
Impedanz aktiv/passive | 200 / 180 Ohm (mono) |
| 400 / 360 Ohm pro System (stereo) |
| Lautstärke aktiv und passiv gleich |
Klirrfaktor | < 1 % |
Lärmdämpfung aktiv | 15 dB ± 3 dB im Bereich von 100 Hz - 2 kHz |
Frequenzbereich der |
|
aktiven Lärmdämpfung | 50 - 600 Hz |
Mikrofon inkl. Vorverstärker |
|
Redel
plug
Blockschaltbild HMEC 25-KAP-2
Wandlerprinzip | |
| geräuschkompensiert |
Übertragungsbereich | 300 Hz - 5 kHz |
| entsprechend |
max. Schalldruckpegel | 120 dB |
Ausgangsspannung | 400 mV ± 3 dB bei 114 dB aus 6 mm Abstand |
| (entsprechend |
Abschlußwiderstand | 150 Ohm |
boom |
microphone |
microphone |
amplifier |
headphone | compensation |
capsule (left) | microphone (left) |
compensation
circuit (left)
compensation |
| headphone |
microphone (right) |
| capsule (right) |
|
|
|
|
|
|
|
| compensation |
|
| circuit (right) |
|
|
|
Versorgungsspannung | typ. 16 V DC, ca 8 - 25 mA, | |
|
| Beschaltung nach RTCA/DO 214 |
Allgemeine Daten |
| |
ca 2,5 N | ||
Gewicht ohne Kabel | 170 g | |
Kabel |
| einseitig, Länge gesamt: 1,8 m |
Stecker | HMEC | |
| HMEC | PJ 068 (Mikrofon) |
|
| 6,35mm Klinkenstecker (Hörer) |
PJ 068 | 6,35 mm |
plug | plug |
12 - 35 V DC | |
Stromaufnahme | typ 18 mA |
8 | 9 |