If a problem occurs ...
If a problem occurs ...
Problem | Possible cause | Solution |
The status LEDs | Charger is not connected | Check if the charger is connected |
3 and 8 do | to the mains | to the NT |
not light up |
| if the mains unit is connected to |
|
| the mains (see page 7). |
| Unstable voltage of the | Replace the defective mains unit |
| mains unit | or mains cable with a new one. |
| Mains unit or mains cable |
|
| is defective |
|
| No contact with the | Insert the bodypack receiver/ |
| accupack | transmitter |
|
| installed – correctly into the |
|
| charging compartment |
|
| (see page 8). |
| Contacts of the receiver or | Clean the charging contacts of |
| contacts of the charging | the receiver and of the charging |
| compartment are dirty | compartment (see page 9). |
| Accupack is defective | Replace the defective accupack |
| (overaged or defective | with a new one. |
| rechargeable battery cells) |
|
The status | Wrong accupack/indi- | Only charge BA 2015 accupacks |
LED 3 flashes | vidual rechargeable | (installed in a bodypack receiver/ |
red | batteries/batteries | transmitter) with the L |
| (primary cells) have | charger. |
| been inserted |
|
| Accupack temperature is | Always recharge the accupacks |
| too low or too high | within the operating temperature |
|
| range and the air humidity range |
|
| stated in the specifications |
|
| (see page 11). |
| Accupack is defective | Replace the defective accupack |
| (overaged or defective | with a new one. |
| rechargeable battery cells) |
|
|
|
|
10 L