
Putting the charger into operation
Connecting the charger to and disconnecting it from the mains
To connect the charger to the mains and switch it on:
Connect the hollow jack plug of the of the NT
Pass the cable of the mains unit through the cable grip 5 as shown.
Connect the mains cable (EU, UK or US version) to the mains unit and to a wall socket.
All status LEDs 3and 8light up for a brief moment. The charger is switched on and in standby mode.
5
6
EU |
|
UK | NT |
US |
To switch the charger off and disconnect it from the mains:
Pull out the mains plug from the wall socket.
L