Using the LSP 500 PRO
Additional indications in the status area
The following additional icons can appear in the status area of the display panel:
Icon
Explanation
Icon is displayed steadily: Bluetooth is activated and one device is paired.
Icon is displayed flashing: Pairing mode is activated to allow Bluetooth devices to pair.
WLAN is activated and the LSP 500 PRO is connected to a network.
Status of the USB player:
•Play
•Pause
•Record
Escape function
When you call up any menu item and ESC is displayed in the upper left corner of the display panel, you can exit the menu item without storing the settings made. When navigating the operating menu, the escape function also allows you to return to the previous menu level.
XX Press the SLOT 1 jog dial to call up the escape function and to exit a menu without storing the settings.
XX Press the SLOT 1 jog dial to return to the previous menu level.
Adjusting the volume
To adjust the input volume of the inputs:
XX Turn one of the six input jog dials (SLOT 1, SLOT 2, SLOT 3, MIC, AUX IN, USB). The icon for the corresponding input is shown on the left of the volume bar.
The LEDs directly above the SLOT 1, SLOT 2, SLOT 3 jog dials and directly below the MIC, AUX IN, USB jog dials indicate the level of the corresponding input. If an LED flickers green, a signal is present at the input. If an LED flickers or lights up red, the signal is overmodulated. The LED of the USB input cannot light up red.
To adjust the overall volume.
XX Turn the MASTER VOLUME jog dial.
The icon for the overall volume is shown on the left of the volume bar. 
You can adjust the volume from
LSP 500 PRO 17
