The operating menu
Display example when compressor is switched off
Display example when compressor is switched on
XX Press the MENU jog dial to open the compressor for the selected input.
XX Turn the MENU jog dial to switch the compressor for the selected input on or off.
The dotted area in the TH slider displays the level of the audio signal.
XX Configure the compressor using the jog dials that are assigned the following functions:
Jog dial | Action | Function |
SLOT 3 |
| Adjusts the compressor threshold (TH) |
USB |
| Adjusts the compressor ratio (RATIO) |
Setting recommendations for the compressor
XX Press the MENU jog dial to store your settings.
Use as ... | To ... | Ratio | Gain reduction |
... leveler | ... compensate for | 1.2 to 2 | The rain reduction |
| volume differences, e.g. |
| should be between |
| due to different talking |
| 0 - 6 dB. |
| distances to the mic or |
|
|
| different speakers |
|
|
... peak limiter | ... compensate for | 4 to 10 | Normally, filesthere |
| sudden signal peaks, e.g. |
| should be no gain |
| due to |
| reduction. |
| touching the sound inlet |
|
|
| basket |
|
|
XX First, set the threshold to +6 dB.
XX Make the desired ratio settings according to the table.
XX During operation, slowly lower the threshold until the desired acoustic effect is achieved.
A gain reduction of more than 10 dB can cause an increased susceptibility to feedback. This is why the gain reduction should be continuously monitored, and, if necessary, adjusted during operation.
LSP 500 PRO 33