Using the LSP 500 PRO
Charge status display on the battery pack
1 2 3 4 5
Charging/replacing the battery packs
To charge the battery packs:
XX Insert the battery packs (see page 11).
XX Connect the LSP 500 PRO to the mains power supply.
The operation indicator K flashes, the charging process starts. When the bat- tery packs are fully charged, the operation indicator lights up permanently.
A complete charging cycle takes about 2.5 hours per battery pack when the product is switched off. If you use the product during charging, the charging time will be extended.
To remove the battery pack from the battery compartment:
XX Open the cover of the battery compartment (see fig.).
XX Pull the battery pack out of the battery compartment using the recessed grip (see fig.).
To check the battery charge status directly on the battery pack:
XX Remove the battery pack.
XX Press the button to the right of the charge status display.
The battery packs‘ current capacity is displayed for approx. 5 seconds.
LED | Color | Remaining capacity |
1 | red, flashing | approx. |
1 | red, permanently lit | approx. |
2 | orange | approx. |
3 | orange | approx. |
4 | green | approx. |
5 | green | approx. |
Upon delivery of the product, the capacity is approx. 30 - 50%.