Putting the RS 160 into operation

Powering the transmitter

For powering the TR 160 transmitter, you can use:

•the supplied SSA-4P 5050F power supply unit for stationary use

•rechargeable batteries (AA size, NiMH, 1.2 V, at least 1,300 mAh) for mobile use

•standard batteries (AA size, 1.5 V) for mobile use

Powering the transmitter via the power supply unit

￿Select the suitable country adapter ￿ for your wall socket.

￿Slide the country adapter ￿onto the power supply unit ￿until it locks into place.

8

EU UK US AU

7

￿Connect the connector ￿ of the power supply unit to the socket ￿.

3

2

9

1s

0

￿Plug the power supply unit ￿ into a wall socket.

The transmitter switches on. The multi-function LED ￿ flashes green after 9 seconds. The transmitter is in enrollment mode.

You can also connect the charging cable ￿ to the connector ￿ of the power supply unit to conveniently charge your headphones (see “Charging rechargeable batteries in the headphones” on page 16 ).

13