Sennheiser 502873, RS 160 Powering the headphones

Putting the RS 160 into operation

For powering the headphones, you can use:

•standard batteries (AAA size, 1.5 V)

•rechargeable batteries (AAA size, NiMH, 1.2 V, 600 mAh)

If you use rechargable batteries, you can charge them in the headphones using the charging cable (see next chapter).

Inserting rechargeable batteries/standard batteries into the headphones and changing the rechargeable batteries/standard batteries

Remove the ear pads from both ear cups by turning the ear pads in the direction of the arrow until you overcome a slight resistance.

Lift the ear pads off the ear cups.

Remove the depleted rechargeable batteries or batteries (where applies).

Insert the rechargeable batteries or batteries. Observe correct polarity.

Secure the ear pads to the ear cups.