Using the RS 160

1s

5s

Switching the headphones on and off

WARNING Danger due to high volumes!

Listening at high volume levels for long periods can lead to permanent hearing defects.

￿Before putting the headphones on, set the volume to a low level.

￿Do not continuously expose yourself to high volumes.

Switching the headphones on

￿Press the multi-function button ￿ for approx. 1 second.

The headphones switch on. The multi-function LED ￿ flashes green, indicating that the headphones are in enrollment mode.

Once the headphones have found a suitable transmitter, the transmitter pairs with the headphones and transmits an audio signal. The multi-function LED ￿ of the headphones and the multi-function LED ￿ of the transmitter flash slowly.

￿

￿

2

Switching the headphones off

￿Press the multi-function button ￿ for approx. 1 second.

The multi-function LED ￿ goes off. The headphones are in standby mode.

If there is no signal from the transmitter for more than 5 minutes, the headphones automatically switch to standby mode.

20