Using the Set 900
Connecting the transmitter to the mains
Select the suitable country
P adapter Q for your wall socket.
Q |
|
| Plug | the | suitable | country | |
|
| adapter | onto the | mains | |||
EU | UK | US | |||||
unit | P. |
|
| ||||
|
|
|
|
| |||
Connect the yellow connector
Iof the mains unit to the yellow socket I on the transmitter.
Plug the mains unit P into a
wall socket.
The operation indicator C 
P on the transmitter lights up green.
Notes:
– When connecting the transmitter to the mains 
for the first time, charge the rechargeable 
battery for 3 hours as described in the chapter 3h “Storing and charging the receiver” on page 17.
–If there is no audio signal from the sound source
for about 3 minutes, the transmitter automatically switches off. The operation indicator C
goes off.
Using the Set 900
To switch the Set 900 system on, proceed as follows:
1.Switch your sound source (e.g. TV) on. The transmitter automatically switches on (see next chapter).
2.Put the stethoset receiver on. The receiver automatically switches on (see page 12).
3.Adjust the desired volume (see page 14).
4.When using the receiver without the transmitter on the move, search for your sound source (see page 12).
10