Additional technical information
Particularities of operating mode 2:
In operating mode 2, the transmitter is not switched on by the sound signal from the sound source.
To switch the transmitter on:
Take the receiver out of the charging compartment.
To switch the transmitter off:
Place the receiver into the charging compartment.
If – in operating mode 2 – you want to use a second receiver and charge its rechargeable battery during operation:
8
0
Pull the battery out of the receiver’s battery compartment 8.
Insert the battery into the charging compartment 0 at the side of the trans- mitter (see “Removing and charging the receiver’s battery” on page 18).
Slide the battery into the transmitter’s charging compartment 0as far as it will go.
29