Sennheiser Set 900 Switching the transmitter on/off, Switching the receiver on/off, Note:, ￿Switch your sound source on, To switch the transmitter on:

Using the Set 900

Switching the transmitter on/off

To switch the transmitter on:

￿Switch your sound source on.

The transmitter automatically switches on. The opera- tion indicator C lights up green.

The transmitter doesn’t switch on?

￿Read the chapter “If a problem occurs ...” on page 24.

To switch the transmitter off:

￿Switch your sound source off.

The transmitter automatically switches off after 3 minutes. The operation indicator C goes off.

To disconnect the transmitter from the mains:

￿Pull out the mains connector from the wall socket.

Note:

When not using the transmitter for extended periods of time (e.g. when you are on holiday), pull out the mains connector from the wall socket. In this case, however, the receiver’s rechargeable battery will not be recharged.

Switching the receiver on/off

CAUTION! Hearing damage due to high volumes!

This receiver allows you to set higher volumes than conventional headphones. This can cause hearing damage in persons with healthy hearing and especially in children.

￿Before putting the receiver on, set the volume on the receiver to a low value.

￿Do not continuously expose yourself to high volumes.

11