Using the Set 900
1 Put the receiver on.
The channel indicator on the receiver lights up:
For an overview of the channel indicator indications, see table below.
Do you hear the desired sound source?
Yes:
The receiver has already found the sound source.
1 | No: |
|
Briefly press the channel search
7button 7.
The sound source is searched for. On the receiver, the channel indicator can light up as follows:
Channel | Frequency | You hear |
indicator |
| the sound in |
| 2.3+2.8 MHz | stereo |
| 2.3 MHz |
|
| 2.8 MHz | mono |
| 95 kHz |
|
If you still haven’t found your sound source, press the channel search button 7 once more.
Notes:
–The channel indicator goes off after 30 seconds so that the light won’t disturb you in a dark room.
–When using the receiver without the transmitter on the move (e.g. in a theater), please note that different information can be transmitted on the channels. Ask an employee of the venue which information is trans- mitted on which channel.
13